New Kitchen mixer taps are having a greater significance in kitchen spaces and they are mainly utilized for proper mixing of both cold and hot water. These taps are mainly installed within kitchen sinks so that you can conduct different kinds of cooking and washing activities in a convenient manner. The lines of cold and hot water can be easily connected by means of the faucets and this is the reason you can use the water only by means of turning or tilting faucet handle. Recently, most people are installing modernized faucets so that water can be utilized in a proper manner within the new kitchen area.
New Kitchen mixer taps are generally available in a host of new designs, and they are designed ergonomically so that you get the maximum utility from these taps, and so that they can be operated by people of different age groups. These taps also occupy less space, so they can keep your basin or sink extremely clean and dirt-free.
Steps for installing new mixer taps:
If you want to install new kitchen mixer taps by removing the old ones, then you have to follow some specific steps. These steps need to be strategically used one after another so that desirable results can be acquired. Some of these steps are as follows:-
- The first step is to disconnect water supply from primary source so that the old one can be pulled off. Access points or cabinets need to be opened along with the turning of knob. The sink stopper must be closed so that the tap accessories do not fall within the drains.
- You can also use old towel at the time of disconnecting the tap faucet so that small parts can be kept and handled conveniently especially screws and other related ones.
- Locking nuts that are found within pipe attachments need to be loosened by using either adjustable wrench or basin wrench.
- You can definitely use a screwdriver for removing the handle’s decorative caps and that can be done by removing screws safely. This will also help you to pull-off tap’s handle and after pulling it off you got to remove packing-nut under it.
- Along with packing nut, stem assembly needs to be opened so that the valve can be easily removed otherwise you will not be able to place the new tap conveniently in the same position.
- Existing putty, epoxy or grout needs to be removed thoroughly and in this case you can use any sharp utility knife so that the grouts can be properly scrubbed off.
- After that, the old faucet must be lifted in a proper manner and must be taken away from new kitchen counter.
- Centerset distance needs to be accurately measured So that the new tap with similar Centerset can be purchased and can be placed in the same position.
- Different small parts or accessories of the tap need to be cleaned so that they can be used freshly in installing the new mixer tap in the place of the old one.
- You must also clean out both the counter and faucet along with the valves so that you can take a good preparation of installing the new one.
- You need to create fresh putty and must apply the same to decorative hole so that the new tap can be properly established.
- You can also follow the directives of the manufacturers so that you can get a correct guidance and can gain a great success in installing the new mixer tap in your new kitchen.
- The water valve of primary source needs to be turned on in order to check out that whether the new mixer tap is working well or not. These ideas can be incorporated for installing both single lever and the wall-mounted new kitchen mixers.
If you carefully follow the above mentioned steps you will be able to install new kitchen mixer taps properly. Let’s go to the details for further information.
